OpenWebRX+ Setup
OpenWebRX+
Browser-based SDR receiver setup, operation, and configuration notes.
Receiver hardware, SDR sources, services, and remote listening.
Builds & Configs
OpenWebRX+ receiver builds, configuration, and operating notes.
OpenWebRX FT8 receiver profiles
The initial frequencies are the standard FT8 dial frequencies. arrl.org Profile name Center frequency (MHz) Sample rate (kS/s) Initial frequency (kHz) Initial modulation* Tuning step 160m…
OpenWebRX CW receiver profiles
with the same units as the phone table. These center and starting frequencies focus on the lower portions of each band where you commonly find CW…
OpenWebRX receiver profile settings for Phone/Voice
Here are some of the profile setting I am testing for the standard HF bands, using U.S. Amateur Extra privileges. Set the units beside the fields…
Building a Web-Based Software Defined Radio with Raspberry Pi 5, OpenWebRX+, and RTL-SDR Blog V4
Turning a Raspberry Pi 5 into a remotely accessible software-defined radio receiver for amateur radio, shortwave listening, and signal monitoring. Introduction One of the things I’ve…